60mm FTTH Field Installable Connector Quick Assembly Termination Connector
FTTH Drop Cable Blue SC Optic Fiber Field Quick Assembly Termiantion Connector 60mm
Optical fiber fast connector is a kind of connector which can solve the problem of ultra long distance wiring and fiber to the home project. It is widely used in the construction site of quick connection link, and provides a fast and stable connection during fiber optic construction. There is no need for glue curing and grinding in the field assembly, which provides a very fast and effective help for engineers on installation, maintenance and repair of fiber to the home project.
Technical parameter:
| Model | YDFIC-D-SU-L | YDFIC-D-SU-S |
| Dimension | 60mm*9mm | 55mm*9mm |
| Insertion loss | <0.5dB, average≤0.3dB |
| Return loss | ≥50dB |
| Fiber type | Single mode, multimode |
| Fiber diameter | 0.9mm, 2.0mm, 3.0mm, 2.0*3.0mm |
| Working temperature | -40 ~+750C |
| Application | Fiber to the home |
| Dimension | 60mm*9mm | 55mm*9mm |
| Standards | ISO9001 |
Connector Structure: 60*9mm
Features
- Each ferrule has been tested within 0.5dB of insertion loss, reach TELECOM standard;
- Adopt Three Circle A-class ceramic ferrule, improves product stability, low loss and small change;
- Large scale production, mature technology, exquisite, which ensure the quality of connectors;
- It has strong practicability and can be reused for more than 15 times;
- Stable operation performance, low insertion loss, low use cost, low maintenance rate and fast installation speed;
- Each 100pcs will equip with 1pc length fixing device;
- Humanized structure design: preset limit point of drop cable at the boot, and automatically generate a small micro bend according to the correct cutting length of the product (see below figure). The micro bend indicates that the optical fiber has been in good contact with the embedded optical fiber, and the micro bend must exist, but not too large, otherwise the loss during the period will be affected.
the connector tail is screw nut,after screw off, the boot can be flip up, after the drop cable insert, then can quickly press it down to tighten the cable with screw nut.
The fast connector with high quality A class three-circle ceramic ferrule, which improves product stability, ensure long time low loss
and small change; ferrule can be UPC or APC.
The connector V groove is plastic, with pre-polished, pre-grinding embedded fiber inside, there is clear cable fixtion slot.
The fiber clamp devices are made of high-performance materials PEI, which can effectively prevent the aging of the original components, and the internal structure with anti loose structure can effectively prevent the occurrence of excessive fiber connection loss.
What is the difference of long and short type?
The long type is flat to lay the drop cable and the short type is vertical to lay the drop cable
Application:
Broadband campus network, Fiber to the home, Broadband limited TV, Intelligent broadband, Fiber to the building
HOW TO USE?
1. Make sure the switch is fully opened downward, insert the optical fiber and push it to the limit point
2. Keep slight bending and tighten the nut first
3. Stripping switch
4. Put on the blue sheath and assemble it
HOW TO RE-USE?
Put on the dust cap, press the blue house and push it down, push the switch to the off position, and screw off the nut to complete the loading and unloading.
Product Tags:
|
|
60mm FTTH Field Installable Connector Quick Assembly Termination Connector Images
|
